Categories
Uncategorized

WiFi Routers info

It looks logics that more antennas on a router are the symbol of getting with better signal out of the router directionality and optimum speeds. This is absolutely right to some extent. Multiple antennas create several streams for sharing data over radio channels, which can give out more bandwidth to your devices and electronic gadgets. However, putting in some more external antennas aren’t necessarily important. The software that drives the antennas is what really matters. While you are purchasing a router, you must think less about the number of antennas and more about added functionality. Specs like MIMO and MU-MIMO increase a router’s capacity to transmit and receive data, which makes your network faster and much more reliable with a better connectivity you will have greater data transfer which at the end gives you an ultimate user experience. The other factor of getting the best outcome from a router is that you must also have a good bandwidth of data on your connection. 

It does not matter if your internet usage is limited or high to checking a few emails and checking out Facebook or you’re one of the 75 million Netflix power-streamers. By utilizing both the 2.4GHz and 5GHz channels, a dual band router can provide you better speed and coverage. That is the main thing what matters most for great Wi-Fi everywhere in your home. While tri-band routers may seem attractive, due to the restrictions of the 5GHz band, you’ll only see normal improvement in device performance. As we know the technology continues to improve; this will also get change in the future. 

Routers have all sorts of speeds limits mentioned on their packaging from 8Mbps (megabits per second) to 1900Mbps. In theoretical manner the higher the number is, the faster your internet speed will go. But do not get too much attention up here. When you are comparing the routers, you will likely see labels touting AC1200, AC1750, AC 3200, and similar to these. The “AC” refers to the wireless standard, while the number refers to the speed. For example, A router with the maximum link rate of 450Mbps on the 2.4GHz band and 1,300Mbps on the 5GHz band is considered an AC1750 router. But there is no individual client device, like your Apple TV, consumes all that bandwidth at the same time it is in use, and every device can only consume one band or the other. In addition to this, for normal Wi-Fi usage you must only really need 50Mbps down consistently throughout your place. 

How you can make selection of a better WI-FI router. It is important to note that the speeds are listed on most traditional router packaging. The real speeds you will see at your home really depends on a variety of other factors, Your ISP connection, the modem, your layout and construction design of your home, and much more. To choose a speed, consider your internet activity for an average internet consumer, AC1200 routers are usually the once which fulfils the basic requirements. 

The router security is an important element when it comes to keeping the information on your network safe. The most important element to know when you are buying a new router are WEP, WPA, and WPA2. All three are WI-FI protected access protocols, which encrypt your network and require that outside devices  and hackers  have a “key” to get access. 

WEP is taken as the outdated and a piece of cake for any of computer hacker to crack. WPA is better and more secure than WEP, but most experts and service providers recommend WPA2 security. Beneficially, latest routers are built with this protocol, but cross-check for this while making your decision.  

Leave a Reply

Your email address will not be published. Required fields are marked *