Categories
Gaming Chairs

Kaimeng Gaming Chair Assembly & Review

I ordered a gaming chair from Amazon  this is one of the cheaper ones and I’ve  ordered this model before, and I’ve had  nothing but good luck with it. it’s  pretty sturdy and I’m still using one.  this is my second chair because the old  chair that I was using in our game room  broke, so now we got another chair. so  let’s open it up see the quality, see if  it’s still as good as the old one and see if  I can recommend it to you guys looking  for a good deal on a gaming chair. and just one thing I love  about these chairs off Amazon is they’re  different manufacturers but  they’re also pretty much the same chair and  the price is under $60 shipped.

as you  can see the quality of the of the  pleather is pretty good has a leather  you know fabric so I can breathe better  and it’s got these holes in the back and a nice  little head rest. this is like a  full-size executive chair in a racing  seat style. a lot of these chairs will  cost you about you know a hundred, two  hundred fifty dollars elsewhere and I’ve  seen many of these in Amazon and  honestly after using this one I haven’t  noticed any difference. it has some  pretty easy to follow assembly  instructions. there’s not many steps  involved, and yeah.  no English required it just tells you  what to do. so now that we got this all  unpacked, let’s get out on the floor.

okay so this thing is really easy to get  together you do need tools but I like to  start with the part that doesn’t need  tools. so these just click right in.  all right so we got this centerpiece on,  and now I’m trying to get that chair  part on for the back support. it doesn’t  really tell you in the instructions  anywhere it doesn’t tell you anywhere in  the instructions where you put the back  whether or not it goes underneath this  or over it, but I can’t see it fitting  underneath it. now if that’s not the way  to do it, we’ll figure that out later. all  right, so it looks like this is the right  way to do it because everything is going  in now pretty smoothly.

Just gonna get  these screws in here and I’m gonna  tighten them really good.  it’s important that you make sure that  you put this on the proper way. if you  need to know what the proper way is this  divot right here sticks out. i’ll just use my  hand to kind of get this started. I do  the bottom first because it kind of  keeps it in and it’s easier to get this  bottom one in.  you just put these caps in to cover the  screw holes. you don’t have to  because to be quite honest these might  loosen up over time, if I’m honest with  you.  these’ll probably be coming off in a year,  usually when the screws start getting  loose they start coming out. so I’ll  leave you with a final shot of the final  product, and I gotta say it looks really  good.  $56 I can’t complain. it’s solid, it  supports my weight, and yeah it’s really  nice. very comfortable. so I hope you  enjoyed this video it’s very different  but I hope you enjoyed watching me put  it together. and if you would like to  purchase one of these chairs yourself  see the link in the description.

Categories
Gaming Chairs

Cheap Gaming Seat

If you are looking for a cheap gaming chair, then you can without further delay discover our selection of the best cheap gaming chairs currently marketed on the internet.

Cheap gaming seat: often damaging faults…

However, if you are looking for a cheap gaming chair, then you must have noticed that it is currently very difficult to find a chair that is quality and which is at the same time below 100 € .

It is important to specify that you can find seats that will be below 69 € but know that for the moment we have not been able to find any equipment up to our criteria with a competitive specification. So beware of the products under this symbolic bar which are often low quality products on aspects such as:

  • Comfort
  • The quality of the casters
  • Lack of ergonomics
  • Lack of fit possible
  • The often fragile coating
  • Lack of kidney and head cushion

Here is a selection of three models which are under the 100 $ gaming chairs and which will bring you complete satisfaction for this price range. It should however be specified that these products are not perfect but that they will be able to satisfy a person who seeks all the same a minimum of comfort and a minimum of specificities with regard to ergonomics in particular to use a chair in everyday life.

The cheap gaming chair from the brand Tresko

As we mentioned in our selection of the best entry-level, the Tresko gaming chair is in our eyes the model that has the best value for money currently on the market. Available in a plurality of colors, this model is the delight of all those who have taken the step of buying it thanks to a very interesting overall service. In terms of comfort, the padding of the seat and the materials used are of very good quality with the presence of two armrests and an integrated headrest. The possibilities of fine adjustment to adjust the seat to make it as ergonomic as possible are also well thought out. This cheap gaming chair and moreover capable of accommodating a maximum load of 120 kg for a very reasonable weight since it weighs only about 15 kg. You can therefore have a great time and have one of the best value for money available on the market today.

Categories
Gaming Chairs

How to Adjust Your Ergonomic Office Chair Properly

I’m here today to demonstrate  how to adjust a chair to prevent back problems.  Many people damage themselves because they  don’t know how to adjust their chair correctly.  In order to make sure that the chair is adjusted  at the correct height you have to sit right  back into the chair  with your hips higher,  your knees lower, and with your feet  firmly on the floor.  The depth of the seat should also be adjusted properly.  You should never have more than three to four fingers’ gap  between your knee and the edge of the seat. you just click on link and read full article on PlayStation 4 Compatible Gaming Chairs.

 That’s how to adjust it – properly.  The back rest of a chair can be raised or lowered according  to the individual requirements  of the end user, with the most pronounced part of the  chair sitting in the small of your back.  The back angle of the chair can be altered depending  on the individual’s requirements  and the preferred working position. 

The armrests of the chair  are necessary to remove the strain and the  weight from the upper back. The lack of arms  can lead to serious problems to the upper  back and shoulders.  The width of the arms can be changed.  The proper way to adjust them  is where the arms naturally fall.  The arms of a chair are an extension of your desk.  It is very important to have them adjusted  at the right height. They move up and down.  That is the right height.  The strain taken completely off the upper back and shoulder area  with your hands resting on the desk. 

When the arm is too low it forces the user to move their  arm down which pulls the shoulder down, putting  additional strain on the shoulder area.  Both the chair and the desk should be adjusted correctly,  depending on the height of the end user.  If the end user is quite short, they could use  a footrest.   If the end user is quite tall  they could raise the desk.  The tension of the chair can be adjusted   from the side, underneath the seat.  It should be adjusted in such a way  to ensure the free-floating movement of the chair,  both in the backward,   and in the forward position. 

Categories
Gaming Chairs

OUR TEST OF THE DXRACER ROBASLUND GAMING CHAIR

In order to help you in the quest for the perfect gaming chair, we have written a large file that explains the criteria to be checked in order to compare the models as well as a selection of the best armchairs, it goes by that: Selection gaming chair 2020.

Otherwise I will tell you about a particular model on this page: the Dxracer RobasLund.

OUR DXRACER ROBASLUND REVIEW

  • Armrests: Completely adjustable
  • Frame: Metal
  • Recommended size: 155-190 cm
  • Max weight: 100 kg
  • Cover: Fabric
  • Backrest tilt: 180 degrees

DxRacer is a fairly old brand in the world of gaming chairs, so I don’t think it is really necessary to present it. Know all the same that it is a brand that has already proven that its products were of quality, you can generally trust them.

Again we ordered the chair from Amazon and received it a few days later with no particular problems.

THE ASSEMBLY OF THE CHAIR

It is a moment that I always fear given my ability to lose screws and not understand the instructions. But no problem on this side there this time, all the screws were there and the manual is well thought out, so it took me about twenty minutes to mount the seat.

THE CHAIR ONCE MOUNTED

Once mounted the chair is more classy I think, I took it in gray since it is the color that fits best with the rest of the office. We can feel the DxRacer paw which has also been copied a lot by low-end brands thereafter except that here it is the original!

THE MATERIALS USED

As usual I always take a look at the materials used to get an idea of ​​the life of the chair. The DxRacer RobasLund is equipped with a frame and a metal jack, so that’s a pretty good sign. Most of the mechanisms are also made of metal, a pity that the base of the armrests is too. However the plastic seems very thick unlike some entry-level chairs. Everything seems to me to be very solid, a good first point.

As for the coating we are on good quality fabric, the finishes at the seams are also neat, no thread protrudes. The fabric is also well ventilated which allows the chair to breathe well and not to heat against it is very messy if you drop coke on it.

HOW IS THE SEAT ADJUSTED?

The settings of a gaming chair are important because this will allow you to find the best possible position for handling your mouse. On this side there the RobasLund is clearly not to be outdone. It is indeed possible to adjust almost everything: the armrests are in “4D” therefore adjustable in orientation, spacing, tilt and height. The backrest leans up to 180 degrees for small naps between your gaming sessions.

We will also note the two small extra cushions located at the lumbar and lower back. I personally do not use it too much for the lower back but it is possible to adjust it to place it at the height you want, pretty cool.

IS IT COMFORTABLE AT LEAST?

This is the main thing, are we sitting in this chair? The answer is a big yes, we can sense that DxRacer didn’t make fun of us instantly. The cushions are perfect, both soft and resistant, so you can sit well even after several hours of play. They quickly regain their shape when you get up, unlike other low-end chairs, so their lifespan should be rather long.

The fabric covering is also an advantage in my opinion since it prevents the chair from heating up too much on contact with your skin.

THE FINAL ASSESSMENT

You will understand that I am really a fan of this chair, at the same time little to blame him except maybe the fact that it is not recommended for people above 100 kg. Otherwise everything that you ask for a good gaming chair is there: the possibility of completely adjusting your chair, quality materials for a good lifespan and very good seating comfort. All offered at a very attractive price compared to the competition, in short difficult to do better.